全国免费服务热线:13961126910

联系我们

常州市源光自动化设备有限公司

联系人: 王先生

手   机: 13961126910

电   话: 0519-86152796

传   真: 0519-86162796

邮   箱: yuanguangkeji@163.com

网   址: www.autoyg.cn

地   址: 常州市武进区雪堰工业集中区华福路2号

详细信息

全自动层压机


全自动层压机(触摸屏数字化控制)

Automatic laminator(touch screen digital control)

型号

层压面积

外形尺寸

设备重量

YG-Y-Z

3600×2200

13500×3050×1400

15T

YG-Y-Z-1

3600×2400

13500×3600×1400

16T

YG-Y-Z-2

3200×1800

12000×3200×1400

14T

需要的冷却水路流量Cooling water flow needed            2L/min

层压高度Laminating height                             25mm

设备总功率Total power of equipment                     65KW

操作控制方式Operation controlling mode                  手动/全自动manual/automatic

加热方式Heating mode                                油加热oil heating

温度方式Temperature control                            比例微积分,智能温度控制

工作区温度均匀性Temperature uniformity in working area     ≦±1.5

温控精度Temperature control accuracy:                    ≦±1

温控范围Temperature control range                       30℃--180℃

抽气速率Pumping speed                               70/

层压时间Laminating time                              14min(包含固化时间including curing time

极限真空Operating vacuum degree                        20-200Pa

抽空时间 Exhausting time                               4-6min

1.智能化温度控制系统,使得温度更加均匀,更加易于对温度的设定与控制。
2.层压压力可调,且可以根据工艺调压,使得组件的质量更加优良。
3.可连续24小时高温工作。
4.先进的触摸屏操作平台,使得操作更加直观、易懂。反应更加迅速,性能更加稳定,故障率进一步降低。
5.采用完全人性化和智能化的系统操作流程,整台设备配备有多处检测开关,在正常的生产工作中,操作人员仅需将组件放在输入平台上,按动输入开关即可,此设备将自动输入组件到主机进行封装、固化,自动将其输出到指定位置等待操作员进行下一工序的处理,并自动进行下一循环工作。
6.三级联动结构紧凑,输入、输出采用带式结构,保证了待压组件的平稳性要求。

1. Intelligent temperature control system makes the temperature more homogeneous and easier to set and control.

2. Laminating pressure is adjustable and can be adjusted according to the process, which makes the quality of modules better.

3. It could work continuously in high temperature for 24 hours.

4.The advanced touch screen operating platform makes it more intuitive to operate, makes it respond more quickly, make the performance more stable and the failure rate is further reduced.

5. Applying a fully humanized operating procedure. The equipment is equipped with many detection switches. In the normal production, operators will only be required to put the modules on the heating platform and press the cover switch. The equipment will automatically laminate, cure and open cover automatically and wait for operator to start the next procedure.

6. Compact three-level linkage structure , and the belt structure is applied for the input and output procedure to make sure the modules to be laminated go smoothly.

热门城市: 更多...

相关新闻

相关产品

单焊加热板

焊接台使用现场

玻璃清洗机

焊带裁剪机

第三代全自动层压机